In case you received a product with support structure, please follow below graphic guide to remove it from the support safely:
Glue
Gel-form superglue works well on 3D printed parts.
Painting
Model Master acrylic paint & Asani paint marker are recomended.
UV curing for Photosensive Resin
UV curing is a procedure which makes the resin harder, our models do not go through this procedure because a product in a softer form is less likely to break during transportation. When you receive it you can put the model under sunlight for a few hours, it will become harder.
Washing
Products made of photosensive resin are washed before dispatching, if you still find it oily when you receive it, alcohol can be used to clean it effectively.
]]>These kits usually come with multiple parts in 2 or 3 colors, most of them requires assembly by applying glue.
3D Printed - Resin(Photosensitive)
These models are usually printed in one piece or fewer parts, with fewer colors but smoother surface, also come with a support structure which requires removal, please use a model cutter.
3D Printed - Mixed
A product mixed with both materials mentioned above.
Laser-cutting
Most of these kits are in a simple design, can be assembled by just popping together parts, we are only reseller for these kits.
]]>